I cannot program the FPGA on this board over USB from Vivado's hardware manager or SDK. I get the error
INFO: [Labtoolstcl 44-466] Opening hw_target localhost:3121/xilinx_tcf/Digilent/210383AF7FB6A
ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210383AF7FB6A.
The supplied demo is working, so the FPGA is functional. The board is a few weeks old.
I have 2 PC's (windows 10 & Ubuntu) that both can connect and program an FPGA board (TEB707 + TEB0821) so I don't believe it's my drivers or cable.
I have Xilinx tools versions 2019.1 and 2021.2 on both PC's. I get similar failures on all.
Debug questions from another post:
- If you are using Windows, can you see the board in the Windows device manager? It would be listed as USB Serial Converter A and USB Serial Converter B under the Universal Serial Bus controllers dropdown, both with which with bus reported device descriptions in the Details tab of their Properties window of "Digilent USB Device"
When I connect the USB cable, I see USB Serial Converter A-D, but the details tab does not show Digilent. All have device description of USB Serial Converter x.
- Did you install the cable drivers?
Xilinx cable drivers, yes
- Are you able to detect the board if you use the Digilent Adept software?
The board is detected, but Initialize chain fails. Note I get the same result with the TEB707 + TEB0821
- Has the board been successfully detected before previously?
no
- Have you attempted to connect the board with a different USB cable or to a different computer? (You do not need to have Vivado installed on a different computer, you can check in the Device Manager or with the Digilent Adept software).
Yes, I tried different cables & the linux computer.
Question
Chris2000
I cannot program the FPGA on this board over USB from Vivado's hardware manager or SDK. I get the error
INFO: [Labtoolstcl 44-466] Opening hw_target localhost:3121/xilinx_tcf/Digilent/210383AF7FB6A ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210383AF7FB6A.
The supplied demo is working, so the FPGA is functional. The board is a few weeks old.
I have 2 PC's (windows 10 & Ubuntu) that both can connect and program an FPGA board (TEB707 + TEB0821) so I don't believe it's my drivers or cable.
I have Xilinx tools versions 2019.1 and 2021.2 on both PC's. I get similar failures on all.
Debug questions from another post:
- If you are using Windows, can you see the board in the Windows device manager? It would be listed as USB Serial Converter A and USB Serial Converter B under the Universal Serial Bus controllers dropdown, both with which with bus reported device descriptions in the Details tab of their Properties window of "Digilent USB Device"
When I connect the USB cable, I see USB Serial Converter A-D, but the details tab does not show Digilent. All have device description of USB Serial Converter x.
- Did you install the cable drivers?
Xilinx cable drivers, yes
- Are you able to detect the board if you use the Digilent Adept software?
The board is detected, but Initialize chain fails. Note I get the same result with the TEB707 + TEB0821
- Has the board been successfully detected before previously?
no
- Have you attempted to connect the board with a different USB cable or to a different computer? (You do not need to have Vivado installed on a different computer, you can check in the Device Manager or with the Digilent Adept software).
Yes, I tried different cables & the linux computer.
I'd appreciate any help getting this working.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now