Tsion Posted January 16, 2015 Share Posted January 16, 2015 Hi all, I have been using zybo board and following this http://www.digilentinc.com/Data/Products/ZYBO/ZYBO-Embedded_Linux_Hands-on_Tutorial.pdf tutorial. I have managed to finish till step 3 of section 5 but it seems imposible(of course for me) to boot linux from the zybo board. please help Link to comment Share on other sites More sharing options...
flynnwt Posted January 18, 2015 Share Posted January 18, 2015 Have you built and booted a bare-metal project on the SD card? I played with that for a couple days (Vivado 2014.4), and I just built linux (Digilent u-boot/linux) and am able to boot successfully. I'm using my own simple PL design (not started from the Digilent zybo base system), so I had a couple of 'hardware' things to figure out along with the software steps, but it does work. I'd like to eventually get something like linaro-nano that I could use with console/ssh. Link to comment Share on other sites More sharing options...
Tsion Posted January 18, 2015 Author Share Posted January 18, 2015 Thanks for replying and the problem end up being with the sd card and it is working fine with a new one. Link to comment Share on other sites More sharing options...
Tsion Posted January 21, 2015 Author Share Posted January 21, 2015 I was trying to use opencv on my board, zybo board, and coudn't find a docmentation on how to do that. Can any one please share some thanks Link to comment Share on other sites More sharing options...
Hanna Posted January 26, 2015 Share Posted January 26, 2015 try cross compiling it for arm core and copy the files to the lib directory on your board. I my self am doing something similar except i couldn't copy the files coz it keeps saying that there isn't enough space. if you have found another way please do share Link to comment Share on other sites More sharing options...
Question
Tsion
Hi all,
I have been using zybo board and following this http://www.digilentinc.com/Data/Products/ZYBO/ZYBO-Embedded_Linux_Hands-on_Tutorial.pdf tutorial. I have managed to finish till step 3 of section 5 but it seems imposible(of course for me) to boot linux from the zybo board.
please help
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.