After creating the project using Vivado 2015.1 I opened the project in Vivado 2018.3. As I understand original project/design files targets a different board Zc702
Now I want to port the example project to Arty-Z7. I changed the board to Arty Z7 from Vivado flow navigator to Arty Z7.
But I do not see any update for Zynq processing system IP in blobk design It has different clock freq, bank voltages DDR setting etc.
So my question is
1. How to port a zynq design in one board to a newer board?? i case of FPGA a projects I could easily do this once the zynq subsystem is in place I find it too complex
Question
rakeshm55
Hi,
I am trying out examples for DMA transfer from PL to PS. As a starting point I try to do it using Xilinx example
My current setup is
1. Vivado 2018.3
2. Board Arty Z7 - 20
Example I am trying to run is in
https://support.xilinx.com/s/article/57561?language=en_US
After creating the project using Vivado 2015.1 I opened the project in Vivado 2018.3. As I understand original project/design files targets a different board Zc702
Now I want to port the example project to Arty-Z7. I changed the board to Arty Z7 from Vivado flow navigator to Arty Z7.
But I do not see any update for Zynq processing system IP in blobk design It has different clock freq, bank voltages DDR setting etc.
So my question is
1. How to port a zynq design in one board to a newer board?? i case of FPGA a projects I could easily do this once the zynq subsystem is in place I find it too complex
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now