Hi, I have using these steps in vivado and vitis 2020.2 to program the flash. So far it is not working for me. When I power cycle the board nothing happens. I can program the FPGA and see the LED's blinking but, nothing happens when I program the flash.
Ad AXI QUAD SPI RTL Block – (Vivado)
Create a separate constraint file for bitstream to configure FPGA – (Vivado)
Edit device properties – (Vivado)
Generate bit stream and export hardware to Vitis – (Vivado)
Gener
Hi @learnfromfailures,
I've had issues getting the SREC bootloader to work through Vitis (and SDK), so there is a different approach that I use, briefly described in this tutorial for an older version version of Vivado, that I've successfully used and confirmed it works with Vivado 2020.2. These are the steps I took (similar to what you did):
Create a block design with Microblaze (guide on how to do this here: https://reference.digilentinc.com/programmable-logic/guides/getting-starte