NorthTech Posted May 6, 2021 Share Posted May 6, 2021 Is it possible to realize an lock-in amplifier in combination with a PID using Analog Discovery 2? The output of lock-in needs to be fed into the PID. Link to comment Share on other sites More sharing options...
JColvin Posted May 6, 2021 Share Posted May 6, 2021 Hi @NorthTech, I have moved your question to a more appropriate section of the Forum where the engineer most familiar with the AD2 and the WaveForms software will be able to see your question. Thanks, JColvin Link to comment Share on other sites More sharing options...
attila Posted May 10, 2021 Share Posted May 10, 2021 Hi @NorthTech It could be done with custom application or Script but running this on the computer would have relatively high USB latency (milisecs). A lower latency solution would be using the ADP 3000 series and running the app/script on the device with AXI latency (microsecs) The best solution would be using Eclypse Z7 and ADC/DAC ZMod and HDL for this purpose (nanosecs) Link to comment Share on other sites More sharing options...
Question
NorthTech
Is it possible to realize an lock-in amplifier in combination with a PID using Analog Discovery 2? The output of lock-in needs to be fed into the PID.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.