DigitalDev Posted May 16, 2016 Share Posted May 16, 2016 I want to interface RFID Reader to FPGA using the SPI Interface of Nexys 4. As the manual says, its already attached with an accelerometer, so how to use it to interface? Thanks in advance. Link to comment Share on other sites More sharing options...
Commanderfranz Posted May 16, 2016 Share Posted May 16, 2016 Hi student_pakistan, You can communicate via SPI through any of the Pmod ports available on the Nexys 4 by using a SPI controller in either VHDL or Verilog. This thread contains an example of how to read from SPI. Could you tell us more about the RFID reader you'll be using? Kaitlyn Link to comment Share on other sites More sharing options...
DigitalDev Posted May 17, 2016 Author Share Posted May 17, 2016 Thanks for all your help. I will check the RDIF Reader's specifications and will get back to you very soon.THanks again. Link to comment Share on other sites More sharing options...
Question
DigitalDev
I want to interface RFID Reader to FPGA using the SPI Interface of Nexys 4. As the manual says, its already attached with an accelerometer, so how to use it to interface?
Thanks in advance.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.