Jump to content
  • 0

jtag-hs2 driver issue

Shani Kleinman



We are trying to use Metaware debugger with Digilent JTAG-HS2 cable HS2 for JTAG connection. 

OS is Ubunto-18.

we've installed driver ( runtime and utilities from https://reference.digilentinc.com/reference/software/adept/start?redirect=1#software_downloads)

when performing  >> lsusb     -we see the device .

when performing  >> djtgcfg enum    

return:   Found 1 device(s)

              Device: JtagHs2

              Product Name:   Digilent JTAG-HS2

              User Name:      JtagHs2

              Serial Number:  210249ACD43  

when running with MetaWeare debugger we get the following msg:  "Could not load libdjtg.so."

we try to add the dir to LD_LIBRARY_PATH but results is the same.


any idea what are we missing?





Link to comment
Share on other sites

2 answers to this question

Recommended Posts

Update: Installed 32-bit driver solve the issue.
we now facing the following errors:

[DIGILENT] This device supports JTAG7 scan formats.
[DIGILENT] Device enumeration: #0 is `JtagHs2'=Digilent JTAG-HS2=SN:210249ACD434.
[DIGILENT] We  chose device  : #0 `SN:210249ACD434' from 1 possible devices.
[DIGILENT] Could not open device `SN:210249ACD434'.
[DIGILENT] No support for opening the device selection GUI.

Link to comment
Share on other sites

Hi @Shani Kleinman,

We don't have a lot of advice regarding the Metaware debugger; there might be some more advice in this thread, https://forum.digilentinc.com/topic/15863-information-about-jtag-hs2-working-on-haps-80/, but in the end you will likely need to reach out to Synopsis with regards to getting the Metaware to correct detect and work with the JTAG HS2.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...