io_pin testing

[richa]

Hello All,

I am using zynq 7000 customize board.In that a pin which is on bank 35 (FPGA) is taken on connector(j3).J3 connector is 7 pin connector in which 7 no. pin is ground.

I am testing all io's by writing counter code.

I am getting waveforms on DSO for  all pins except  6 no. pin.

I have added then chipscope .On chipscope i am getting the waveform but not on DSO.

What can be the reason ?

[D@n]

@richa,

Not knowing anything more, my first guess would be that pin #6 is a 3.3V rail and my second guess than you don't have the right pin mapping in your .xdc file.  Any of those sound familiar?

Dan