The SPI interface/connector at location J6 does not appear to work. It works if I put the device/driver in loop back. I've put the pins on an oscilloscope and I don't see and signals. I've double checked to FPGA pin assignments with the schematic of the ARTY A7 board too. Is there a configuration step I'm missing?
Question
Johnnie White
The SPI interface/connector at location J6 does not appear to work. It works if I put the device/driver in loop back. I've put the pins on an oscilloscope and I don't see and signals. I've double checked to FPGA pin assignments with the schematic of the ARTY A7 board too. Is there a configuration step I'm missing?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.