Sheryfa Posted November 25, 2018 Share Posted November 25, 2018 hi, can anyone help me if the design is correct.. the connections bettween zynq processing system and pmod wifi.. the example code httpserver can't work correctly : Link to comment Share on other sites More sharing options...
0 jpeyron Posted November 26, 2018 Share Posted November 26, 2018 Hi @ Here is a youtube tutorial on using the Pmod wifi. Did you add a valid login/password for the wifi? Why are you using the pmod SD IP core? The ZYNQ processor should be handling the SD card on the Zedboard unless you are using the pmod SD? thank you, Jon Link to comment Share on other sites More sharing options...
0 Sheryfa Posted November 27, 2018 Author Share Posted November 27, 2018 hi, in the tutorial they used the pmod wifi with pmod sd.. but now i did the same project "ZED_WIFI_SD" , so i have the same errors: Unable to find default HTML page: HomePage.htm Unable to get a WiFi connection with key Hard Error status 0x10003A00 occurred. Shutting down pmod wifi run correctly if i do the scan.. but if i wanna to connect him with pc or smart phone i can't.. the error is always "Unable to get a WiFi connection with key" thanks for replaying.. Link to comment Share on other sites More sharing options...
0 jpeyron Posted November 27, 2018 Share Posted November 27, 2018 Hi @Sheryfa, The error message is from line 417 of the ProcessServer.CPP. Following the functions one potential situation is stated on line 374 which is as follows: // not all WiFi adpators support calculating the PSK key for you // however, if it does then we can caculate it, print it out and then // then we know what it is and can connect with a key. I would guess that your wifi network has additional security in place that requires a key to be entered to gain access to the wifi. cheers, Jon Link to comment Share on other sites More sharing options...
0 Sheryfa Posted November 29, 2018 Author Share Posted November 29, 2018 hello, what additional securety?.. i followed the errors and i can't see where is the problem.. always "Unable to get a WiFi connection with key" .. i'm wondering why anyway thanks Link to comment Share on other sites More sharing options...
0 jpeyron Posted November 29, 2018 Share Posted November 29, 2018 Hi @Sheryfa, What type of security setting is your router set to? Here is a link that discusses this. thank you, Jon Sheryfa 1 Link to comment Share on other sites More sharing options...
0 Sheryfa Posted December 12, 2018 Author Share Posted December 12, 2018 hi again, i found the error but i have no solution.. the problem is in ipserver , i can't read the ip adress IPv4 ipServer = {192,168,1,190}; in the terminal i read: Connecting to network... Connection Created Started Listening 0 Sockets listening on port: 44400 if there is no problem in "ipServer".. where is the problem whene i write in the program "deIPcK.getMyIP(ipServer);" than "xil_printf("Server started on %d.%d.%d.%d:%d\r\n",ipServer.u8[0],ipServer.u8[1],ipServer.u8[2],ipServer.u8[3], portServer);" the terminal can't write it.. thanks Link to comment Share on other sites More sharing options...
0 TY Fan Posted December 6, 2019 Share Posted December 6, 2019 (edited) On 11/26/2018 at 11:02 PM, jpeyron said: Hi @ Here is a youtube tutorial on using the Pmod wifi. Did you add a valid login/password for the wifi? Why are you using the pmod SD IP core? The ZYNQ processor should be handling the SD card on the Zedboard unless you are using the pmod SD? thank you, Jon Hi, I have a problem with wifi scan. According to deIP.h, error status 0x10002001 refers to an adaptor error. Is there a way to solve this error? Im using a SD card on a ZYNQ board so there is no Pmod SD IP core.Thanks! Edited December 6, 2019 by TY Fan Link to comment Share on other sites More sharing options...
0 TY Fan Posted December 6, 2019 Share Posted December 6, 2019 18 minutes ago, TY Fan said: Hi, I have a problem with wifi scan. According to deIP.h, error status 0x10002001 refers to an adaptor error. Is there a way to solve this error? Im using a SD card on a ZYNQ board so there is no Pmod SD IP core.Thanks! I got it. There is a physical connection problem with the Pmod connector I'm using. I switched to another one and it's working all fine again. Thanks anyway! Link to comment Share on other sites More sharing options...
0 JColvin Posted December 6, 2019 Share Posted December 6, 2019 Thanks for sharing what you found! Link to comment Share on other sites More sharing options...
0 pulkit Posted November 15, 2021 Share Posted November 15, 2021 Hi, I am trying to interface Pmod wifi module with FPGA since 30 days but it is not responding. Today i tried to simply scan wifi using pmod wifi module. It again failed. Below is the error: Connected to COM3 at 9600 Wifi Scan 3.0 Scan Failed Status value: 268443650 End of Demo I am attaching vivado design and sdk design screen shots. Please help to find out if i am doing anything wrong with the IPs. Does digilent's pmod wifi module really work with the IPs provided ? Thank you. Link to comment Share on other sites More sharing options...
Question
Sheryfa
hi,
can anyone help me if the design is correct.. the connections bettween zynq processing system and pmod wifi.. the example code httpserver can't work correctly :
Link to comment
Share on other sites
10 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now