JTAG-HS2 firmware erased by accident

[shahabamo]

Hello,

My JTAG HS2 firmware accidentally erased while i was trying to program another FTDI device connected to the PC and the programmer is not detected anymore by Xilinx Impact. 

Please help me how to recover it?

[JColvin]

Hi @cwmoreiras,

I have sent you a PM with some instructions.

Thanks,
JColvin

[tom.des]

Hello, 

I'm working on a board with an FPGA and a FTDI FT2232H component. I also use an HS2 probe for the JTAG part. Using the FT_Prog program, I have the impression that the HS2 probe is no longer functional. It is no longer recognised by Vivado although the FT_Prog programme still sees it. I tried another HS2 probe. It works. 
How can I repair the first HS2 sensor?

Thank you in advance for your feedback.

 

[JColvin]

Hi @tom.des,

I have sent you a PM with some instructions.

Thanks,
JColvin

[hiroki]

I need the same help, Please send me PM.

My JTAG HS2 firmware accidentally erased while i was trying to program another FTDI device connected to the PC and the programmer is not detected anymore by Xilinx Impact. 

Please help me how to recover it?

[JColvin]

Hi @hiroki,

I have sent you a PM.

Thanks,
JColvin

[yildizabdullah]

Hi JColvin,

Could you also please share the recover utility with me?

Thanks and regards,

[JColvin]

Hi @yildizabdullah,

I have sent you a PM with some instructions on how to recover the JTAG HS2.

Thanks,
JColvin

[nflint7]

Hi @JColvin,

I accidentally erased the firmware of my FTDI programming module. It is a JTAG-SMT4

[SHoldt]

I accidentally erased the FT2232 configuration on my Xilinx AC701 evaluation board. Could you provide me with instructions on how to restore it, please?

[Vishvesh]

Hello, 
Facing the same issue, erased the firmware for JTAG HS2 by mistake. Request to share the recovery instructions.

Edited Tuesday at 11:47 AM by Vishvesh

[JColvin]

Hi @SHoldt and @Vishvesh,

I have sent you both a PM.

Thanks,
JColvin