Search the Community
Showing results for tags 'netfpga'.
We have a 16 node NetFPGA system with Xilinx Programmers which detects the hardware devices without any issues. We are trying to use Digilent HS3 programmers instead and they do not detect the hardware devices even with all the relevant drivers installed. We have used many of the troubleshooting procedures in forums with similar issues with no solution. Furthermore, we have installed Digilent Adept 2 as well to doublecheck. It does show that the programmer is there, it still doesn't detect the hardware devices. Device is properly identified: $ dadutil enum Found 1 device(s) Device: JtagHs3 Device Transport Type: 00020001 (Transport Type = USB, Protocol = 2) Product Name: Digilent JTAG-HS3 User Name: JtagHs3 Serial Number: 210299B4C076 All the libraries are present: $ /sbin/ldconfig -p | grep ftd2xx libftd2xx.so (libc6,x86-64) => /usr/lib64/digilent/adept/libftd2xx.so libftd2xx.so (libc6,x86-64) => /usr/local/lib/libftd2xx.so libdftd2xx.so.1 (libc6,x86-64) => /usr/lib64/digilent/adept/libdftd2xx.so.1 libdftd2xx.so (libc6,x86-64) => /usr/lib64/digilent/adept/libdftd2xx.so Still, it doesn't detect any hardware devices: $ djtgcfg init -d JtagHs3 Any help in this regard is appreciated.
Hello all, After changing PC I want to continue working on NetFPGA-1G-CML board inserted into PCIex16 slot. Board was detected without any problem in my old PC, but my new PC wont detect board as PCI device, its invisible to OS (Linux/Fedora - lspci - device not shown in the list). I tried more motherboards (PCs - like Gigabyte B85M-DS3H and ASUS H81M-R), but without success. Do you know about some constraints/requirements except size and speed of PCIe slot (these requirements are met on tested PCs) of motherboard (or other part of PC), which must be met? I didnt find any information about it in more detail. Thanks for help and any suggestion. My greetings
Hello, We are working on an older system with a Virtex-II pro with rocket I/o and would like to know if the NetFPGA Virtex-II Pro FPGA Development System would be a suitable development board ( it is the same fpga I just need to see if it supports rocket I/o).