Search the Community
Showing results for tags 'hs3 jtag'.
We have a 16 node NetFPGA system with Xilinx Programmers which detects the hardware devices without any issues. We are trying to use Digilent HS3 programmers instead and they do not detect the hardware devices even with all the relevant drivers installed. We have used many of the troubleshooting procedures in forums with similar issues with no solution. Furthermore, we have installed Digilent Adept 2 as well to doublecheck. It does show that the programmer is there, it still doesn't detect the hardware devices. Device is properly identified: $ dadutil enum Found 1 device(s) Device: JtagHs3 Device Transport Type: 00020001 (Transport Type = USB, Protocol = 2) Product Name: Digilent JTAG-HS3 User Name: JtagHs3 Serial Number: 210299B4C076 All the libraries are present: $ /sbin/ldconfig -p | grep ftd2xx libftd2xx.so (libc6,x86-64) => /usr/lib64/digilent/adept/libftd2xx.so libftd2xx.so (libc6,x86-64) => /usr/local/lib/libftd2xx.so libdftd2xx.so.1 (libc6,x86-64) => /usr/lib64/digilent/adept/libdftd2xx.so.1 libdftd2xx.so (libc6,x86-64) => /usr/lib64/digilent/adept/libdftd2xx.so Still, it doesn't detect any hardware devices: $ djtgcfg init -d JtagHs3 Any help in this regard is appreciated.
Last week I ordered and received a Digilent HS3 JTAG cable. I can't get my PC to recognize it. I scanned this forum and noticed other people had quite similar issues with HS2/HS3 cables. Some, but not all, were able to have this resolved. After trying all the suggestions, I still can't get it to work. Here's more information, and what I've done that brought me closest to a solution (I think). - I have tried everything below on both a PC and a Laptop, both running Windows 10 Professional, with the same results. - I have the Xilinx SDK 18.2 installed and have created a working Hello World app for a Microzed 7010 board for which I used a Xilinx Platform Cable. Since I have to return that platform cable, I purchased the HS3. - I recently also installed Xilinx Vitis which included Vivado 2020.1. - When I plug in the HS3 cable Device Manager shows it as 'USB Serial Converter' under 'USB Serial Bus Controllers'. - Based on various suggestions I then do the following: - In Device Manager, I right click that 'USB Serial Converter' and click 'Uninstall device', where I DO check the box 'Delete the driver software for this device'. - Then I run (as admin) 'D:\Xilinx\Vivado\2020.1\data\xicom\cable_drivers\nt64\install_drivers_wrapper.bat' - The install_drivers_wrapper.log files shows the following: INFO: InstallPath="D:\Xilinx\Vivado\2020.1\data\xicom\cable_drivers\nt64\" windrvr6 is not installed (this is expected for Windows 10 and later) INFO: Installing Windows 10 pcusb driver... Microsoft PnP Utility Processing inf : xpcwinusb.inf Driver package added successfully. Published name : oem32.inf Total attempted: 1 Number successfully imported: 1 INFO: INF file D:\Xilinx\Vivado\2020.1\data\xicom\cable_drivers\nt64\dlc10_win10\xpcwinusb.inf was successfully installed for driver. INFO: Running digilent installer... <<<<< Digilent Adept Runtime Setup >>>>> Installer version: 1.5.8 release: 2018/06/22 Digilent Software Path: C:\Program Files (x86)\Digilent Your system is up-to-date with the components of this installer. INFO: Running SmartLynq installer... INFO: SmartLynq installed successfully - Then in Device Manager, I click Action->Scan for hardware changes, and under 'Other devices' appears 'Digilent USB Device' with an exclamation mark in front of it. Usually it sits there for a few seconds, and then it disappears and shows up again as 'USB Serial Converter'. - The last time I did this, it did NOT revert back to USB Serial Converter, and when I checked its properties it said: The drivers for this device are not installed. (Code 28) There are no compatible drivers for this device. To find a driver for this device, click Update Driver. - Updating the driver finds no suitable driver. - And that's where I'm at now: an unrecognized HS3 cable. Any suggestions are welcome!