RggBer

Hi digilent team: In this drawing, the DOVDD of OV5640 is powered by 1.8V so that PCAM_5C adopts "power up with internal DVDD" according to its datasheet. The DVDD net on drawing seems to be output of OV5640. Does OV5640 automaticlly configure DVDD pin as output? Any additional operation is needed when I have PCAM_5C board?

Hi Digilent team, I try to connect pcam-5c to Zybo Z7 by its J2 and use MIPI csi-2 rx subsystem IP core provided by xilinx. Refer to Zybo-Z7-Master.xdc, the dphy_xxxx_lp_n/p signals are defined as HSUL_12 IO standard. HSUL_12 is typically considered as single ended IO, why these are _n/p definitions in XDC file which usually considered as diff signal type. The same question to connect FMC Pcam Adapter to Zedboard by its FMC. Does level shift IC on FMC Pcam Adapter affect IO definition to lp_n/p signals?