Tazam

Hi Fausto, Thank you for your response! This is exactly what I needed to know. I tested the device with InstaCal and it did pass just like your image. I modified the board as per your instructions and now the digital ports are all pulled down. Working perfectly! Thank you!

I'm using a 1024LS to read inputs into 1stPortA/DI 0 - 7 and 1stPortB/DI 0 - 7 (16 channels). The Labview vi has boolean indicators that will light up if the input to any of these ports is >4.5V. The problem is, each of the 24 DIO ports on my 1024 are outputting 5V automatically (4.7V on DMM), which gives me incorrect values when I actually run the test. I am able to set each DIO port OFF (0V) programmatically, however, as soon as I move on to reading it, the value is 5V. The 1024 User Guide mentioned '..if configured to input..' suggesting the device can be set as an input somehow. I tried using InstaCal but the Config button only has options to change device ID and flash the device LED. Anyone knows how I can reset the 1024 to be input only? Thank you!