Hello @Fausto,
Thank you for your response and for offering your assistance. I appreciate the help. Below, I have provided the detailed specifications for the signals we are working with and the requirements for our application.
1. SSI (Synchronous Serial Interface) Signal Specifications:
Interface Type: Differential output according to RS422/RS485.
Bit Rate: Up to 1.0 MBaud.
Signal Format: 25-bit frame, binary coding.
Operating Frequency: 500 to 3700 Hz depending on the measurement range.
Power Supply: 24VDC.
Operating Conditions: Temperature range of -40 °C to +75 °C, 90% relative humidity, non-condensing.
2. Analog Signal Specifications:
Signal Type: Voltage or current signals (e.g., 0-10V or 4-20mA).
Resolution: Typically 12 to 16 bits depending on the input type.
Power Supply: 10-30VDC.
Operating Conditions: Temperature range of -20 °C to +85 °C.
3. Application Requirements:
We are looking for a robust and reliable DAQ solution capable of handling both SSI and analog signals, with a USB output interface for easy integration with our existing systems.
The solution must be suitable for industrial environments, taking into account the operating conditions mentioned above.
4. Software Application:
Currently, I do not have specific information on the software application used. I am in the process of consulting with my team to gather this information.
Any suggestions or recommendations for compatible hardware and software solutions that meet these requirements would be greatly appreciated.
Thank you once again for your support.
Best regards,
TENDJOU Thomas