[weird waveform]

thank you. it solved the problem. May I ask what circumstances the J2, J3 should be set to AC on the connector board? what are J4, J5 for?

[weird waveform]

HI

I used waveform generator to produce a simple square wave, as in pic1.  I connected the w1 to Ch1 for scope visualization, and I saw RC decay trace instead of a square wave. 

Could you advise what went wrong?

waveform to generate:

sampled by the scope:

thank you,

 

[sampling rate for analog discovery 2 data logger]

I only need to record at 10Khz for 1hr or 2hr. I tried the rec to file function. It doesn't draw the trace while recording. when choosing to draw trace in the config tab, the display range can not be controlled or can't be shown as shift mode other than record mode. is there better visualization module while streaming the data out? could you suggest?

  

[sampling rate for analog discovery 2 data logger]

Hi 

AD2 has 100Ms/s sample rate, but in the data logger, how to customize sampling rate?  there are only a few options from the drop down menu. How to use it as a data logging device, such as those from NI? 

Thank you.