[MCC 128, which I2C bus is being used by MCC128 hat.]

Raspberry 4B, it has 6 off I2C bus. 

Could you please which ones are used by MCC128?

Could I use the ones which are not used by MCC128?

Thanks

[MCC128 DAQ measuring the same on all channels]

I am struggling with the MCC128 board that AD the same thing on all channels

As enclosed, it is an example for ch0 input of a battery voltage.

Then, I run the example finite_scan.py which AD of channels (0,1,2,3).

Suprisingly, all the channels show almost the same value.

I have tried other single channel logging, but all the others show the same thing.

Could anyone share their experiences?

Thanks a lot!

[MCC128 DAQ cannot log data at 10ksps]

Hi

I have tried 4 ch @10kSps per channel. 

The goal is to save the digitized data without any loss every 1 min in the test.

It did not pass the test based on Python example, as it did not scan/acquire the data stream from the buffer. I can see every scan it did get much less data points than expected!

Plz advise what is wrong and how to move forward!

 

Thx!!!!