![](http://content.invisioncic.com/f319528/set_resources_20/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
BrianV
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by BrianV
-
-
I am Currently using two MCC134's stacked on top of a Raspberry pi. I have the first MCC134 closest to the pi set to address 0, and the second to address 1. I am able to read values from channel 0 1 2 and 3 from the first MCC134, but not the second one. can someone please help me figure out how to read values from the second MCC134.
tc_type = TcTypes.TYPE_E # change this to the desired thermocouple
type delay_between_reads = 1 # Seconds
channels = (0, 1, 2, 3,) try: # Get an instance of the selected hat device object.
address = 0
hat = mcc134(0)
i have attached a copy of the code that i am currently using.
Need Help with errors after running code for 15+minutes
in Measurement Computing (MCC)
Posted
To whom it may concern
I am an engineering student working on a temperature test bench. If i run the code i have attached ReadValuesBV1 by itself the code runs fine, (ran it and reading values for about an hour.) but as soon as i run the code with all the other code that my teammates have written i run into some issues. I have attached pictures of the errors I am receiving. The program will run fine for about 15 minutes and then i encounter error1 (image_2061) the code is still reading values but then i get "warning - address(1,2,3) using factory eeprom default values" after about another 5 minutes i get the second error(image00000) "warning - address(0) using factory eeprom default values" and address 0 board not responding and then it stops reading values completely. do i have to calibrate the board when somewhere at the start of the code, which i have attached, in order to prevent these issues. If so would i use the function below to do that and what would be the factory calibration values or slope values needed. if you know of any other method to prevent this i would really appreciate it. Thank you. The program that i encounter the crash on is when running mainguiJH.py which opens up a gui and has you select preset values to test and the program that calls functions from the file actually reading the values (ReadValuesBV1.py) is called MainAI. How do i fix this issue. Thank you any guidance would help.
mcc134.calibration_date() Read the calibration date.
mcc134.calibration_coefficient_read() Read the calibration coefficients for a channel.
mcc134.calibration_coefficient_write() Write the calibration coefficients for a channel.
ReadValuesBV1.py mainAIdigilenthelp.py mainGUIJHdigilenthelp.py