Jay Bland
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Jay Bland
-
-
When I let our lab know that the PersonalDaq 54, 55, and 56 were discontinued and the recommended replacement is the USB-2408-2AO they responded "I believe the D8400 module will perform as required for thermocouple and 4 to 20mA inputs."
Is this the same product as the USB-2408-2AO? Here is a link
-
JRys, we will need to purshace the updated D8400, do you have a way for me to get an official quote?
-
Great! Thank you for all your help
-
Thank you for letting me know. Is there a cost associated with the DAQami software?
-
Thank you again for your assistance, I had one more question: Is there a newer version of this device available for purchase? If there is, is it fully compatible with Windows 11?
-
I ran Dell Command/Windows updates but still ran into the same issue. I wanted to check if there's anything specific you know of that may work before we need to look into purchasing a new DAQ device.
-
Thank you for letting me know, I'll check the machine to make sure it's completely updated. If that doe not resolve the issue do you have any other ideas?
-
Thank you for your prompt response. I'm running PostView but encountering the following issue. Apologies for the confusion, i guess the issue lies with DaqView and not PostView?
The PC currently in use shows the device as recognized:
The PC we are migrating to does not recognize the device, it only show the two simulated devices:
Is there a reason why the new Win11 PC doesn't pick up the device?
-
Hello, thank you for letting me know about the LEDs. The LEDs are on when the unit is connected to the PC currently in use. I also noticed that when I connect the device to this PC windows automatically recognizes the device and installs drivers, etc.
When I connect the unit to the PC we are trying to migrate to, the following happens:
Windows makes the sound that the device is being recognized but there is no notification like on the other PC that the device is actually being recognized and that the drivers are installed. The LEDs also will not power on when connected to this PC. Here is a picture of the desktop when this happens:
-
Thank you,
Just to make sure I follow correctly, the active device will display if both DaqView and PostView are ran as administrator? I'm not quite sure I understand.
-
I am migrating our current PC running PostView and connected instrument to a new machine. I've installed PostView and Personal DaqView but am encountering an issue on the new PC: when I open PostView the active device is missing, only the 2 simulated devices are available. How am I able to get the active device recognized on the new PC?
PostView - Active Device not recognized
in Measurement Computing (MCC)
Posted
I'll let them know, thank you!