ptembras

Hello, I'm using the SF3 Flash memory Pmod in my project. I need to use interrupts from PL to PS, but when I use the PmodSF3 library, the other interrupts don't work. I think that the memory initialization using the Pmod library is breaking the other interrupts. I'm initializating the memory as follows Status = InitInterruptController(&mySF3.sIntc); if (Status != XST_SUCCESS) { //printf("\r\nError initializing interrupts"); return XST_FAILURE; } Status = SF3_begin(&mySF3, &mySF3.sIntc, &ivt[0], XPAR_PMODSF3_0_AXI_LITE_SPI_BASEADDR); if (Status != XST_SUCCESS) { //printf("Error initializing SF3 device\r\n"); return XST_FAILURE; } And the other interrupt GicConfig = XScuGic_LookupConfig(DeviceId); if (NULL == GicConfig) { return XST_FAILURE; } Status = XScuGic_CfgInitialize(&InterruptController, GicConfig, GicConfig->CpuBaseAddress); if (Status != XST_SUCCESS) { return XST_FAILURE; } /* * Setup the Interrupt System */ Status = SetUpInterruptSystem(&InterruptController); if (Status != XST_SUCCESS) { return XST_FAILURE; } Is it possible to do this? Because everything works fine but when I put this togeter the PL-PS interrupt doesn't work