Jump to content

Seth Slavin

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by Seth Slavin

  1. Hello. Using the USB-1208-FS-PLUS. Want to get a clock signal output on the SYNC pin that is 20Hz. I tried recommended advice to start sampling analog channel with DaqAMI and then expected to see the 20Hz output on the SYNC pin. I do see that when I am not sampling that a higher frequency signal is present on the SYNC pin in the kHz range but when I start sampling I do not see any signal coming off. Is there another parameter that needs to be set in the DaqAMI?
  2. We have your USB-1208FS-PLUS for an application we are working on and we would like to see if there is any way we can get a clock signal output at 20Hz through this device. From reading the support pages it seems like we can get a SYNC output of the internal A/D pacer clock. I know there is a dynamic clock input range but I was not sure if this internal A/D pacer clock is adjustable. It seems to be able to be altered through an internal software set up, but I was not sure. If this is not possible then can you please recommend one of your product offerings that also has Analog and Digital I/O peripherals.
×
×
  • Create New...