Posted
·
Edited by Fausto removed contact information
Using a USB-1208LS 8 Channel Data Acquisition USB DAQ Module and 2 Switch and Sense 8/8 boards.
A power source went bad, said source was replaced and all connections were checked for damage and continuity.
InstaCal will now only register the USB DAQ and one board at a time (based on whichever was plugged in communication first), previously the boards had a seral number in the title in instacal but now whichever over board is showing no serial number is there.
The Leds flash for the connected board when checked.
Let me know if there is any more information I can provide.
InstaCal not reading both SwitchAndSense-8/8 devices
in Measurement Computing (MCC)
Posted · Edited by Fausto
removed contact information
Using a USB-1208LS 8 Channel Data Acquisition USB DAQ Module and 2 Switch and Sense 8/8 boards.
A power source went bad, said source was replaced and all connections were checked for damage and continuity.
InstaCal will now only register the USB DAQ and one board at a time (based on whichever was plugged in communication first), previously the boards had a seral number in the title in instacal but now whichever over board is showing no serial number is there.
The Leds flash for the connected board when checked.
Let me know if there is any more information I can provide.
Regards,
Pritesh Patel