jay2718
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by jay2718
-
-
ubuntu and wsl is the dev environment
risc-5, see my Friday post :
-
It actually is on my Nexys A7... up time 14:26 now.
-
-
-
Sorry for the confusion, I want to end up running Linux on the Nexys A7 device itself.
The idea is to build up some software that is special purpose, and create device drivers to interface with external systems, e.g. control systems, etc.
The included image comes from digilent and displays a possible embedded linux design (Zedboard).
"The reference design includes the proper configuration for most of the peripheral devices available on-board your product including the interrupt controller, timer, clock generator, AXI interconnects, etc. that are all essential for Linux to operate properly."
https://digilent.com/reference/_media/digilent_embedded_linux_guide.pdf
Thanks
-
Here is the guide, "Xilinx Vivado block designs for FPGA RISC-V SoC running Debian Linux distro." github eugene-tarassov/vivado-risc-v.
https://github.com/eugene-tarassov/vivado-risc-v
I wish to interface to some analog, digital, and mixed signal circuits, vme bus and such.
What will be key, is to create a device driver. Any info on this?
I did find yts, it was Ubuntu 18.04.5 LTS on Win10/11 wsl2 that worked with all the guides.
I am trying to build two cores w RISC V, still installing the Vivado 2022.2 on U18.04.5 LTS. This Xilinx download is 74.42 GB, and needs to run (7 to 8) hours to complete.
How to Install RISC V on Nexys A7 100T by Ryan Heng ( https://youtu.be/ECA-D6ZFnU4 ).
Setting up a Nexys board in Linux! by FPGAs for Beginners ( https://youtu.be/9gJdh8Rb1vI ).
WSL2 Ubuntu GUI by David Bombal ( WSL2 Ubuntu GUI by David Bombal )
-
I see the guide for zynq -7000, is this the guide?
Thanks
-
Folks,
I would like to up and running on linux, any distro.
It is the 100T nexys a7 artix-7.
I'm viewing the digilent embedded linux guide, says it places the apu, (cortex-a9), etc.
I have vivado 2022.2 running and placing designs, if the bit file is available somewhere?
Looking for step by step guide.
Thanks in advance!
nexys a7 bootstrapping linux guide
in Embedded Linux
Posted