Joerg Hampel

Good morning, a customer of ours uses the DT9837a DAQ device in one of their test systems. They use NI LabVIEW to read measurements. When reading out data, we see a timeout (error 1004) sporadically - every 10 measurement runs or so. Here is the full error message: DtLvLink.lvlib:Error Converter (ErrCode or Status).vi<ERR> Timeout <b>Complete call chain:</b> DtLvLink.lvlib:Error Converter (ErrCode or Status).vi DtLvLink.lvlib:Lvi Read Dbl Data2D.vi DtOLReadMultiple2D.vi LVLink_Data Acquisition.lvclass:Read Muliple Channels Multiple Samples.vi Data Acquisition.lvlib:Main.vi:4140003 Data Acquisition.lvlib:Main.vi.ACBRProxyCaller.9AF00026 We're using the LV-Link Software Interface for LabVIEW as provided by the LvLink3.10.0.0.exe installer. The device manager shows the device named DT9837a under "DT-Open Layers Data Acquisition Devices". These are the VIs we execute for each measurement: Any help is much appreciated! Thanks in advance! Best regards, Joerg