Jump to content

Markzan

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Markzan

  1. Hi @Fausto It works with a factory reset. Many thanks. Regards
  2. Hi I have a problem with a new E-TC board. The error on instacal, opening Analogic Test is the following : "Network device did not respond within expected time". The other two board in my labs works correctly. It's the first time I have seen this message. Thanks
  3. Yes, the device was recently purchased. SN :21052C9 We've checked the wiring and tried several thermocouples, and it doesn't seem to be the problem. Now let's see whether to send you the device or rely on a local company (this choice will also be made on the basis of timing). Thanks
  4. Hi I use E-TC devices to monitor temperature. With a new device , one of the channel is out of calibration (2 - 4 degree). How can I calibrate it, if I do not have a tiny power source of "millivolt" as instacal suggest? thanks
  5. Hi John Thanks for the support. I will try with another BTH dongle. I'll update this post as soon as I found a solution. regards Marco
  6. Hi John thanks for the fast reply. The program exit saying : "Bluetooth connection failed", but debugging, the board is recognized as in attached image. I confirm the upper Green LED is blinking. Regards
  7. Hello John I confirm that I am using the device with batteries and no cable. I am able to see the device correctly paired and listed to the InstaCal's list (board #0 paired), as the manual said. The BTHCONNECTIONFAIILED error occured with the original example files (C# projects in these cases). Regards, Marco
  8. Dear All I am having trouble with the device BTH-1208LS and Windows10 I can read input data with the USB cable connected, but no via Bluetooth. The device is acquired correctly by InstaCal but when I try to acquire data I've got always this error : BTHCONNECTIONFAILED (Verify the Bluetooth connection.) but the bluetooth works well and the device is connected. I have also disabled antivirus and all the programs that could interfere with the connection. Thank you very much for taking the time to resolve this question
×
×
  • Create New...