[USB-201 not powering on after firmware update]

Hi John,

The device was working fine prior to the firmware update.. I followed your advice step by step, and nothing changed. So, I keep thinking I must be doing something wrong - maybe I'm not shorting it correctly? I checked the USB cable, it is Ok - powering other MC devices without a problem.. Changing USB ports at the PC also didn't do anything.

This was the first time we opened any of the MC devices, the 7-digit serial number is: 18EB972.

[USB-201 not powering on after firmware update]

Hi JRys,

Thanks you for the help!
I found J9 on the circuit board and connected the two central pins (attached photo) with a piece of wire, but the device did not power on nor was it registered in InstaCal. Is there another method to reboot the device?

I have another USB-201 device at the adjacent test station. Can I utilize that one to enable the other one somehow?

All best,

Nedo

[USB-201 not powering on after firmware update]

Hi,

Instacal software froze while updating firmware on USB-201 device. Now the device is not powering on or being registered anywhere on my PC. Could you please help me out?

All best,

Ned

[JTAG-HS2 firmware erased by accident]

Hi,

The same thing happened to me with USB-201 device while updating firmware. Now the device is not powered on or registered anywhere on my PC. Could you please help me? I don't know what else to do.