presire

Thanks, for letting me know this information. I do not have any evidence for iMPACT working on newer Linux distributions in conjunction with the Basys 2, so at this point I would say it does not work. I suspect (much like you do) that there is a driver issue of some kind at play here, but the engineer most familiar with Digilent's Adept software and the plugin that I linked earlier is not intending to invest time to figure out what the root cause might be. I have been able to receive a variety of information and would like to close this question then.

Please don't miss the point. I have already confirmed that iMPACT works on SLE and openSUSE using Platform USB Cable2. I just want to know, if iMPACT works properly using Basys2 on relatively new Linux distributions. If it does not work, that is fine.

To @JColvin I would like to learn in Xilinx ISE and iMPACT, working seamlessly together with GUI. Is there an error caused by the absence of WinDriver6 for linux or by loading libusb-driver.so? Also, can iMPACT(ISE 14.7) be used with the latest Fedora and Debian GNU/Linux? Thank you.

To "JColvin" I installed the Digilent Plugin, but nothing appears in the [Port:] pulldown in the cable setup. The environment variable XIL_CSE_PLUGIN_DIR is specified in the ~/.profile file. ~/.profile export XIL_CSE_PLUGIN_DIR="$HOME/.cse" The libCseDigilent.so and libCseDigilent.xml files are located in the $HOME/.cse/lin/14.7/plugins/Digilent/libCseDigilent directory. $HOME/.cse/lin/14.7/plugins/Digilent/libCseDigilent/libCseDigilent.so $HOME/.cse/lin/14.7/plugins/Digilent/libCseDigilent/libCseDigilent.xml Also, when I place the libCseDigilent.so and libCseDigilent.xml files in the /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent directory, the cable Nothing appears in the [Port:] pull-down in the configuration.

No, openSUSE Leap 15.3 (64bit) was released last year, and 15.4 (64bit) was just released this month. I think that you are misunderstanding me. I'm using openSUSE Leap 15.3 (64bit) and 15.4 (64bit). Incidentally, the current openSUSE Leap 15.x is 64-bit only. The only document I referred to when installing Xilinx ISE 14.7 on my openSUSE Leap 15.3, 15.4 (64bit), is for openSUSE Leap 42.1 (64bit). Looking at various web sites, I have seen articles about running Basys2 and iMPACT on Ubuntu 20.04 LTS, so I would like to know if this is possible on other distributions (ex. openSUSE Leap 15.x).

This is my first time writing. I'm using openSUSE Leap 15.3 (64bit) and 15.4 (64bit), Xilinx ISE 14.7, Basys2. The installation procedure for Xilinx ISE 14.7 is based on openSUSE Leap 42.1 (64bit) at the URL shown below. http://www.blunk-electronic.de/ise/howto_install_ISE_on_SuSE.pdf (based on "ISE Installation on OpenSuSE Linux Leap 42.1 (64bit)") In addition, I also have the latest "Adept Runtime", "Adept Utility", "libCseDigilent" installed. lsusb # Output Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 004: ID 1443:0007 Digilent Development board JTAG Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 062a:4102 MosArt Semiconductor Corp. Wireless Mouse Bus 001 Device 002: ID 1a81:1004 Holtek Semiconductor, Inc. Wireless Dongle 2.4 GHZ HT82D40REW Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub When I start iMPACT and run "Initialize Chain", I get the error shown below. On iMPACT, writing is not possible. GUI --- Auto connect to cable... AutoDetecting cable. Please wait. *** WARNING ***: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for setting the baud rates PROGRESS_START - Starting Operation. Using windrvr6 driver. Connecting to cable (Usb Port - USB21). Checking cable driver. File version of /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusbdfwu.hex = 1030. File version of /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex = 1030. libusb-driver.so version: 2022-06-17 11:19:34. Cable connection failed. Connecting to cable (Parallel Port - parport0). libusb-driver.so version: 2022-06-17 11:19:34. parport0: parport1: parport2: parport3: LPT1 Base Address set from env variable = 0. LPT base address = 0000h. LPT1 Ecp Address set from env variable = 400. ECP base address = 0400h. LPT port is already in use. rc = FFFFFFFFh Cable connection failed. Connecting to cable (Parallel Port - parport1). libusb-driver.so version: 2022-06-17 11:19:34. LPT2 Base Address set from env variable = 10. LPT base address = 0010h. LPT2 Ecp Address set from env variable = 410. ECP base address = 0410h. LPT port is already in use. rc = FFFFFFFFh Cable connection failed. Connecting to cable (Parallel Port - parport2). libusb-driver.so version: 2022-06-17 11:19:34. LPT3 Base Address set from env variable = 20. LPT base address = 0020h. LPT3 Ecp Address set from env variable = 420. ECP base address = 0420h. LPT port is already in use. rc = FFFFFFFFh Cable connection failed. Connecting to cable (Parallel Port - parport3). libusb-driver.so version: 2022-06-17 11:19:34. LPT4 Base Address set from env variable = 30. LPT base address = 0030h. LPT4 Ecp Address set from env variable = 430. ECP base address = 0430h. LPT port is already in use. rc = FFFFFFFFh Cable connection failed. PROGRESS_END - End Operation. Elapsed time = 2 sec. Cable autodetection failed. WARNING:iMPACT:923 - Can not find cable, check cable setup ! In the cable setup, select "Digilent JTAG USB" radio button, [Port:] pull-down shows nothing, as shown in the image. However, "dadutil", "djtgcfg" command are working properly and these commands (CUI) can write. djtgcfg enum # Output Found 1 device(s) Device: Basys2 Device Transport Type: 00010001 (USB) Product Name: Digilent Basys2-100 User Name: Basys2 Serial Number: 210155473605 djtgcfg init -d Basys2 # Output Initializing scan chain... Found Device ID: d5045093 Found Device ID: 11c10093 Found 2 device(s): Device 0: XC3S100E Device 1: XCF02S dadutil showinfo -d Basys2 # Output Product Name: Digilent Basys2-100 User Name: Basys2 Serial Number: 210155473605 Product ID: 00800122 Firmware Version: 0116 Device Transport Type: 00010001 (Transport Type = USB, Protocol = 1) Device Capabilities: 00000005 DJTG - JTAG scan chain access DEPP - Asynchronous Parallel Input/Output Can't I use Basys2 with iMPACT on Linux? Or is there some setting that is missing? Thank you in advance for your response.