Jump to content

Blue21

Members
  • Posts

    4
  • Joined

  • Last visited

Blue21's Achievements

Newbie

Newbie (1/4)

1

Reputation

  1. Hi attila, many thanks for the quick answer.
  2. Hi everybody I lost the power supply of my ADP3450. I tried others "19V" supply but they didn't work at all. I didn't found any spare power supply brick on Digilent web site. Anybody know where to get one or a compatible one ?
  3. Hi @attila Thanks for the quick answer. If I understand well, there is not a real way to set the unused IO of the adapter (as output) and make a measurement using the impedance instrument and make that the set IO remain in their state. It is one or the other. Actually I was able, using script to make link between 2 Discover2 (one for the impedance, one for the multiplexer): use DIO0-3 to talk to the Discover2 with the mux and set channel run impedance instrument and get measurement next channel This way the channel is latched by the second Discovery2 attached to the mux. A little expensive solution for longterm. Probably a hardware latch will be needed and powered by my multiplexer board. Thanks in any case for the clarification. Really amazing devices and especially the software. A little wish would be to have a line number indicator in the status line of the script source code. Would help to retrieve the line related to an exception.
  4. Hi Analog Discovery 2 with impedance adapter. I am trying to use the digital I/O (as output) that are not used by the impedance adapter 0-3 and 8-11. I mainly need 4 to control a front-end multiplexer for the impedance adapter. The adapter use I/O 4-7 and 12-15 as output. As soon the Impedance measure is triggered, these I/O goes to zero. Is there a way to control them or I need to use a second Discovery 2 to control the multiplexer and found some way to operate them in sync? Thanks in advance for any suggestions.
×
×
  • Create New...