[ECLYPSE Z7 Power failure]

Hi @JColvin

Thanks for your reply

The voltage at different caps are as follows

C305 - 0.5V

C243 - 0.12V

C249 - 0.14V

Thanks

Saeed

[ECLYPSE Z7 Power failure]

Hi @JColvin

Is there any update?

Thanks
Saeed

[ECLYPSE Z7 Power failure]

Hi @JColvin

Thanks for your reply

The voltage at different caps are as follows

C291 - 12.08V

C293 - 3.3V

C271 - 5.02V

C277 - 1.00V

C302 - 0V

C264 - 12V

C303 - 0V

C296 - 1.2V

There is no visible physical damage to any ICs. None of the status LEDs are on. The peripherals attached to the system were Zmod ADC 1410 on ZMODA, and one serial LCD on the PMOD connected through flying wires.

It looks like that IC29 has somehow locked every thing, but I can not find any datasheet of it.

Thanks

Saeed

[ECLYPSE Z7 Power failure]

Hello. 

I bought an ECLYPSE Z7 board some time ago. I was working on a project where I was interfacing some external peripherals on PMODs of the board. The board has suddenly been turned off and not powering up anymore. Kindly guide me in this. To figure out what is the cause and how can it be corrected. Seems like the custom power IC isn't turning on

Thanks