[Analog Discovery Pro - WaveForms project resets math functions on opening]

Hey Attila,

You are, as always, a hero! Thanks for the workaround and the future fix. :)

- David

[Analog Discovery Pro - WaveForms project resets math functions on opening]

I have a test setup incorporating a differential voltage probe and current probe, where a math channel automatically calculates the power. 

On re-opening this project after saving, the math function lands at "Voltage x Voltage" instead of the saved Voltage x Current". Is there a solution to save this in the waveforms config file as well? It's been causing a lot of messed up measurements when a user forgets to reset this.

Looking forward to hear! 

Power x Excursion.dwf3work

[Changing Scope Time Average setting through script]

Hey Digilent,

I'm working through some automated measurements using the Analog Discovery 2 AWG and Scope channels, and would like to change the scope's averaging setting on the fly. I can change most of the settings using the following code: 

    // Setup scope
    Scope1.Time.Position.value = 0;
    Scope1.Time.Base.text = "5 us/div";
    Scope1.Time.Rate.text = "100 MHz";
    Scope1.Time.Samples.text = "Default";

But can't seem to find the average setting. Is there a way to change this? Or is this fixed based on the setting in GUI? 

Thanks in advance!

- David

 

[Visualize Scope and parsed protocol analyzer data in same plot]

I'm calculating and recording power through a load based on voltage and current measured on C1 and C2 of my Analog Discovery 2 scope, at 4kHz, for about an hour. Next to this I would like to log the temperature of the same load, or which the data is supplied through a UART.

Would it be possible to visualize both these measurements in the same plot using a script? Perhaps by writing to a reference or math channel? We would have to be able to see all the values and plots live. 

Thanks! David