Jump to content

thirtyy

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by thirtyy

  1. On 12/20/2023 at 1:45 AM, JColvin said:

    Hello,

    It was pointed out to me that the XAPP894 mentions that if external termination is used (which the Zybo Z7 uses the style shown in Figure 11), the common mode voltage can drop to 100 mV, which is what you are measuring.

    Let me know if you have any questions.

    Thanks,
    JColvin

    Thank you very much, this is exactly what I wanted

  2. Hi

    I am interested how MIPI common mode voltage agrees with FPGA common mode requirements? On the scope seems that CM voltage is 100 mV (attached picture, measured at 100 ohm differential). But on the Xilinx documentation seems that minimum is 0.3V.

    In theory on 150 ohm this should be 300 mV diff and 150 mV common mode, still too low.obraz.png.8383b0bae16bd098aecaf61a52fe9eb0.png

    obraz.png.9ce25a0800af83e184751bfbbbbbf04a.png

×
×
  • Create New...