[Configuring FT2232H compatible with Digilent JTAG cable]

10 hours ago, JColvin said:

Hi @sandeep,

I apologize for the long delay I clearly missed this post; I have sent you a PM as well.

Thanks,
JColvin

Thank you

[Configuring FT2232H compatible with Digilent JTAG cable]

On 11/30/2020 at 11:29 AM, sandeep said:

Hi JColvin,

Can you please update on its a bit urgent.

Thanks,
sandeep

 

[Configuring FT2232H compatible with Digilent JTAG cable]

Hi JColvin,

We are also facing same issue.

We need a similar license to emulate Digilent board using FT4232H over Xilinx Vivado.

Thanks,

sandeep

[FTDI 4232H programming for FPGA JTAG detection]

Hi ,

We are working on custom board based on zynq ultrascale+RFSOC .

We had configured FTDI4232H  channel 0 as JTAG port using FT_Prog utility. FPGA is not getting detected.

It was found that specific EEPROM image has to be programmed for accessing FPGA through FTDI4232H.

Can you please provide EEPROM image.

If EEPROM image cannot be provided can we get preprogrammed FT4232H ICs. 

Thanks,

sandeep