Leon.k
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Leon.k
-
-
Hello JColvin,
Sorry for delay.
To my regret the problem is still appear.
You can see the connections between HS3 and ARTY7 on attached image.
HS3 pin1 connected to ARTY J8.5 by black wire. (GND)
HS3 pin2 connected to ARTY J8.6 by red wire. (VCC)
HS3 pin4 connected to ARTY J8.1 by purple wire. (TMS)
HS3 pin6 connected to ARTY J8.4 by yellow wire. (TCK)
HS3 pin8 connected to ARTY J8.3 by blue wire. (TDO)
HS3 pin10 connected to ARTY J8.2 by white wire. (TDI)
I purchased 2 HS3 adapters and both of them behaviors the same.
You can see it on attached images.
What can be a reason?
What another way to check HS3 cables?
But with the old Digilent USB cable all works correctly.
-
-
Now, after the next reinstallation, the status has changed.
The direct connection is working.
The HS3 connection recognized, but doesn't work.
-
-
I'm working with ARTY-A7 FPGA board and ADEPT v2.19.2 in Windows 10.
At first, the system often lost contact with the board, but after reinstalling digilent.adept.system_v2.19.2, the connection was restored.
Now reinstalling no longer helps.
What can be a reason?
Adept doesn't see the ARTY-A7 board
in FPGA
Posted
Well. Looks like I found the problem.
Sorry for inconveniences.