cd C:\Xilinx\Vivado\2022.1\data\xicom\cable_drivers\nt64 
install_drivers_wrapper.bat

logfile:
INFO: InstallPath="C:\Xilinx\Vivado\2022.1\data\xicom\cable_drivers\nt64\"
windrvr6 is not installed (this is expected for Windows 10 and later)
INFO: Installing Windows 10 pcusb driver...
Microsoft PnP Utility

Processing inf :            xpcwinusb.inf
Driver package added successfully.
Published name :            oem328.inf


Total attempted:              1
Number successfully imported: 1

INFO: INF file C:\Xilinx\Vivado\2022.1\data\xicom\cable_drivers\nt64\dlc10_win10\xpcwinusb.inf was successfully installed for driver.
INFO: Running digilent installer...

<<<<< Digilent Adept Runtime Setup >>>>>
Installer version: 1.5.8 release: 2018/06/22
Digilent Software Path: C:\Program Files (x86)\Digilent

Your system is up-to-date with the components of this installer.
INFO: Running SmartLynq installer...
INFO: SmartLynq installed successfully



===========================================================================================

Vivado 2022.1 Design Tools or Devices ... > Installer > next > Authorization > Vivado ML Enterprise > Installation Options > Install Cable Drivers
Warning" Xilinx software was installed successfully, but an unexpected status was returned from the following installation task(s)
The syntax of the command is incorrect.

Open Target > connect automatically
shows localhost(0) status: connected
Hardware Manager - unconnected

=====================================================

Digilent Adept utility shows "No Devices Connected"

=====================================================

Once driver uninstall completes please disconnect the programming cable.
Launch the command prompt in administrator mode and navigate to "C:\Xilinx\Vivado\<your Vivado version>\data\xicom\cable_drivers\nt64\dlc10_win7".
For example, for Vivado 2019.1 the directory will be
"C:\Xilinx\Vivado\2022.1\data\xicom\cable_drivers\nt64\dlc10_win7"
Once in this directory please run the below commands:
wdreg -compat -inf %cd%\windrvr6.inf uninstall
wdreg -compat -inf %cd%\xusbdrvr.inf uninstall
wdreg -compat -inf %cd%\windrvr6.inf install
wdreg -compat -inf %cd%\xusbdrvr.inf install

Open Vivado Hardware Manager and select "Open target" --> "Auto Connect"?
You will now be able to detect the JTAG chain.