$ petalinux-boot --jtag --prebuilt 3
INFO: Sourcing build tools
WARNING: Rootfs image size is large 0x47C3901(71MB), it can cause boot issues.
Please refer to petalinux FAQ for JTAG Boot Mode in UG1144. Storage based RootFilesystem, is recommended for large images.
INFO: Launching XSDB for file download and boot.
INFO: This may take a few minutes, depending on the size of your image.
rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.: Inappropriate ioctl for device
INFO: Configuring the FPGA...                                                                                                       
INFO: Downloading bitstream: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/system.bit to the target.
INFO: Downloading ELF file: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/pmufw.elf to the target.                         
INFO: Downloading ELF file: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/zynqmp_fsbl.elf to the target.                   
INFO: Downloading ELF file: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/u-boot.elf to the target.                        
INFO: Loading image: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/Image at 0x00200000                                     
INFO: Loading image: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/system.dtb at 0x00100000                                
INFO: Loading image: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/rootfs.cpio.gz.u-boot at 0x04000000                     
INFO: Loading image: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/boot.scr at 0x20000000                                  
INFO: Downloading ELF file: /home/ddickerhoof/Genesys-ZU/os/pre-built/linux/images/bl31.elf to the target.